Sr. HVAC Technician
 JLL | |
 United States, Maryland, Baltimore | |
| 500 East Pratt Street (Show on map) | |
 Nov 15, 2024 | |
|
What this job involves: Oversees the daily operation of the site HVAC, utilities, and site systems. This will include water steam and additional site systems. This position has a strong focus on maintaining, troubleshooting and repairing facility equipment on all systems. A very high percentage of "wrench time" is expected. Individuals are expected to demonstrate technical expertise in HVAC maintenance & troubleshooting and be multi-skilled in other areas (pipe fitting/plumbing, electrical) in order to successfully complete daily/weekly work assignments. Strong mechanical and electrical ability required. Must be willing to work out of trade when necessary to perform other work tasks, assist other crafts and work as a multi-craft mechanic.
This position requires a high level of technical expertise with a variety of building infrastructure. The position may be called upon to perform other general maintenance and support duties on an as needed basis. What your day-to-day will look like: Air handling equipment /air filters including DP monitoring and air balancing. Refrigeration systems (specialty multi circuit systems). DX Systems. Process Chillers / Comfort chillers. Manage refrigerants in compliance with State and EPA requirements, including maintaining accurate refrigerant usage and inventory records. Responsible to action all alarms during a shift. Monitor the operation and make necessary adjustments on heat exchangers, HVAC systems, Centrifugal Chillers, Cooling towers, VAV systems, electrical, emergency backup systems, and hot water systems. Monitor operation, adjust, and maintain refrigeration, chilled water, and air conditioning equipment. Monitor and repair boilers, and ventilating and hot water heaters; pumps, valves, piping and filters. Monitor and repair other mechanical and electrical equipment; record readings and adjust where necessary to assure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action, as required. Install and repair plumbing / piping / tubing; wire single and three phase motors (under the direction of the Senior Electrician); run conduit; pull wiring to machinery, motors, operating parts, etc.; install and rebuild pumps and motors; install and rebuild air compressors; heat exchangers; replace bearings in all types of motors; replace seals on pumps; install and repair piping, valves, filters, hot water systems and associated controls; assist other mechanics and operators with major repairs and maintenance of building and equipment. Install, repair, and maintain electrical controls, switching and motor controls. Troubleshoot and PM VFD (variable frequency drives) on HVAC units and pumps. Utility Substation HV (High Voltage) switching and monitoring load distribution on site. Perform routine facility repairs, including sheetrock, patching, caulking, painting, lock repair, and piping. Must be capable of identifying, utilizing and operating tools and equipment associated with craft discipline. Must demonstrate the ability to comprehend and recognize all job-related work permits and complete Job Hazard Analysis Must be able to perform work wearing personnel protective equipment. Including but not limited to the following: rain gear, chemical protective clothing, supplied air and air purifying respirators, safety harness, sand blast hoods, flame retardant coveralls, flash suit with gloves and hood, hard hat, ear plugs, and safety glasses. Should be able to estimate costs and order materials. Must be qualified to operate a man lift, scissor lift, forklift and respirator fitted. Must be able to work in high places (not afraid of heights) and work in confined spaces. Must be able to work off lifts and scaffolds and understand elevated work standards. Comply with policies for the safe storage, usage and disposal of hazardous materials. Maintain compliance to State, County, or City Ordinances, Codes, or Laws Document work performance and materials procurement, as directed. Physical Job Requirements: Must be able to adequately perform required job functions. This includes being able to lift, bend, and move in such a way as to perform job tasks in a safe and approved manner. Must be able to lift 50lbs. Overhead work / working at heights. Skilled and physically able to operate electric hand tools, work on a ladder, carry tools, lift, and carry heavy loads, operate required equipment, and operate a motor vehicle. Able to work in close places such as closets, crawl spaces, attics, vaults, etc. Subject to 24-hour availability and required to work in all weather conditions. Environmental conditions will vary based on the job being performed. Work may take place in either the maintenance shop and/or in the plant depending upon the job requirements. Must be capable of working outdoors in all types of weather conditions. Working Hours: The shift is 7:00 AM to 3:30 PM, Monday through Friday. We are seeking an individual for a role that requires availability for on-call work. This position may entail working off-hours shifts, including evenings, nights, and weekends as necessary. Desired or preferred experience and technical skills: Trade license, apprenticeship, or equivalent trade experience vocational certification is preferred. Required Skills and Experience: 7+ years of experience working with commercial HVAC systems. Experience with Siemens or Honeywell BAS systems. Universal EPA 608 Certification (Refrigeration). Experience supervising or acting as a lead within a team. Proficient with computer-based systems and programs, including Microsoft Office and Outlook. Must have adequate skills to perform required job functions with minimal supervision. Able to work in a customer service environment interacting with the client. Team player with good interpersonal skills. Conflict resolution skills. Ability to communicate well in both oral and written reports. #HVACjobs | |