Brazer

Under the direction of the supervisor fabrication, brazers set up and sliver/copper braze pre-cut and drilled parts to form finished products.

ESSENTIAL DUTIES AND RESPONSIBILITIES

This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time.

1. Read and interpret blueprint specifications to determine procedures and operational sequence.

2. Prepare parts by cleaning in sand blaster or cleaning tanks.

3. Locate and position parts according to engineering specifications using holding fixtures, jigs, etc.

4. Use measuring devices to set up, adjust and verify conformance of work to specifications.

5. Apply heat, flux, etc., using care to insure proper flowage, adherence, strength of joint and to avoid damage or destruction to parts.

6. Follow all clean - up and housekeeping procedures.

7. Comply with all safety regulations.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience

Requires education generally equivalent to a high school diploma. Fork lift certifiable. Previous experience preferred. Experience of up to two years necessary to become familiar with methods, procedures and processes.

Language Skills

Ability to read, interpret and work form drawings, bills' of material and specifications. Ability to speak effectively in one-on-one situations with other employees in the organization.

Mathematical Skills

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Must be able to perform metric conversions.

Reasoning Ability

Ability to apply commonsense understanding to carry out detailed but uninvolved instructions. Ability to deal with problems involving a few variables in standardized situations.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties and responsibilities of this position, the employee is occasionally required to walk, climb or balance, stoop, kneel, crouch or crawl, reach above shoulders and move from place to place. The incumbent will regularly stand, sit, talk and listen and will frequently use hands to finger, handle or touch. This position requires occasional lifting up to 50 pounds. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The employee works in a factory environment and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is moderate to loud.